The Wenquan Town project in Lushan City, Jiujiang City is located at the foot of the Lushan Scenic Area and is built in the leisure center square. The water feature of this fountain adopts Taurus paving pedestal, and the whole fountain water feature is oval, with 3cm thick black marble. Crowds are prohibited from stepping on this area, so the weight of the stone itself is used, and the bottom and ground of the pedestal are not additionally reinforced. Before paving, it is necessary to pre-set the water outlet of the fountain, water pipes and wires on the ground. However, you still need to pay attention to the following during the installation process:1. Do a good job of cleaning and leveling the foundation ground to ensure that the ground is free from potholes and depressions.2.Calculate the number and height of supports needed. (The height of the support should include the thickness of the stone itself).3.Draw grid landmarks in the area to be used in advance.4.Assemble the support according to the correct method.5.Start laying from the edge, and use instruments to assist leveling while laying. 6.For the paved area, fix the support with cement or ground nails.