Plastic edging for landscaping is a simple and effective way to create borders and separate different areas of your yard. It comes in a variety of colors, styles, and sizes to suit any landscape design. Installing plastic edging is also an easy DIY project that can be completed in just a few hours.

The following is a step-by-step guide on how to install plastic edging for landscaping:

Plan the project

Before purchasing the plastic edging, decide where you want to install it and measure the length of the border. This will help determine how much edging you need.

Clean the selected area

Thoroughly clear the area where you plan to install the edging to remove grass, weeds and debris. Use a shovel, rake, or hoe to clear the space.

Place the edging

Unroll the plastic edging and place it along the border. Make sure the top edge of the edging is level with the ground.

Secure the edging

Use stakes or spikes to secure the edging in place. Start at one end and work your way down, spacing the stakes every 2-3 feet. Hammer the stakes into the ground until they are flush with the top edge of the edging.

Cut the edging

If necessary, use scissors or a utility knife to cut the edging to fit around curves or corners.

Connect sections

If you have multiple sections of edging, connect them together using the manufacturer's recommended method. This may involve overlapping or interlocking the pieces.

Backfill

Once the edging is secured in place, backfill the area with soil or mulch. This will help hold the edging in place and give it a finished look.

While the basic steps for installing plastic edging are straightforward, there are some tips and tricks that can make the process easier and more effective.

Here are five little-known tricks for the easiest installation, as identified by Grass Barrier:

Use a rubber mallet

Instead of a hammer, use a rubber mallet to secure the edging stakes in place. This will prevent damage to the edging and ensure a tight fit.

Pre-bend the edging

If you are installing edging around a curved area, pre-bend the edging before securing it in place. This will help it follow the curve more easily.

Use two stakes per section

For extra stability, use two stakes per section of edging. Place one stake at each end of the section, rather than spacing them evenly throughout.

Install in warm weather

Plastic edging can become brittle in cold temperatures, so it is best to install it when the weather is warm. This will make it easier to work with and reduce the risk of cracking.

Consider professional installation

If you have a large or complex project, or if you are not confident in your DIY skills, consider hiring a professional to install the plastic edging for you.

In conclusion, installing plastic edging for landscaping is a simple and affordable way to add structure and organization to your yard. With proper planning and execution, you can create a beautiful and functional landscape design that will enhance the overall appearance of your property.